> Konami Connector < ******************** Amidar, Bimmelbahn, Circus Charly, Commando (Konami), Dommy, Eggs, Frogger, Iron Horse, Jail Break, Juno First, Kicker, Locomotion, Lost Tomb, Mega Zone, Mikie, Moonwar, Nemesis, Pandora's Palace, Pooyan, Road Fighter, Rock'n Rope, Rush 'n Attack, Scramble, Scrambled Egg, Space Pilot, Strategy X, Super Basketball, Super Cobra, The End, Time Pilot, Time Pilot '84, Turpin, Turtles, Tutankham, Yie Ar Kung Fu, Solder Side | Parts Side ________________________________|___________________________________ -5*** | A | 1 | +12 Speaker | B | 2 | Speaker 2P Button 2 | C | 3 | 2P Button 1 2P Left | D | 4 | 2P Right 1P Start | E | 5 | 2P Start 1P Button 1 | F | 6 | 2P Up 1P Button 2 | H | 7 | Service Switch 1P Right | J | 8 | 1P Left 1P Up | K | 9 | 2P Down Coin (1) | L | 10| Coin (2) 1P Down | M | 11| Coin Counter (1) 1p Button 3 | N | 12| Coin Counter (2) Video Green | P | 13| Video Blue Video Red | R | 14| Video Sync | S | 15| 2P Button 3 GND | T | 16| GND GND | U | 17| GND +5 | V | 18| +5 ***note on -5V input: not all boards use a -5V input. Frogger, Gyruss, and Time Pilot do. Track and Field and Hyper Sports don't. This is no big deal, EXCEPT that some boards may get "confused" if you send them -5 on the usual -5 pin (ie: HyperSports). So if you plug one of these boards into a standard Konami cabinet and get strange things on the screen, try disconnecting the -5 as your first step in troubleshooting: Track & Field/Hyper Sports Connector Solder Side | Parts Side _______________________|________________________ NC | A | 1 | +12 Speaker | B | 2 | Speaker 4P Run 2 | C | 3 | 4P Jump 3P Run 2 | D | 4 | 3P Jump 1P Start | E | 5 | 2P Start 2P Jump | F | 6 | 3P Run 1 2P Run 2 | H | 7 | Service Switch 1P Jump | J | 8 | 1P Run 2 1P Run 1 | K | 9 | 4P Start Coin (1) | L | 10| Coin (2) 3P Start | M | 11| Coin Counter (1) 2P Run 1 | N | 12| Coin Counter (2) Video Green | P | 13| Video Blue Video Red | R | 14| Video Sync | S | 15| 4P Run 1 GND | T | 16| GND GND | U | 17| GND +5 | V | 18| +5