ZANEN ELECTRONICS 5023 52nd Street Lubbock, Texas 79414 806-793-6337 Kit # 208 Installation Instructions This monitor repair kit is designed for the Wells-Gardner 19V2000 monochrome monitor. Be sure to check that all the parts are included in the kit: 4 1 uF @ 50V or 63V 2 1000 uF @ 50V 2 2.2 uF @ 50V 1 4.7 uF @160V 1 47 uF @ 50V 1 22 uF @ 250V Be sure to install all the parts on the monitor even though many of the original parts seem to be working fine. Age, humidity, and temperature will cause the value of electrolytic capacitors to change. Installing all of the parts will assure many more years of trouble free service. Each capacitor is polarized and can only be inserted in one direction. Watch the polarity markings-on each capacitor. On the top side of the monitor board where each capacitor is located is a plus sign next to one of the two holes where the capacitor leads are to be inserted. The plus sign indicates where the positiye (+) lead on the capacitor is to be inserted. Make sure the game is unplugged and install the following parts. C703 2.2 uF @ 50V C500 1 uF @ 50V or 63V C900 1000 uF @ 50V C501 1 uF @ 50V or 63V C901 1000 uF @ 50V C502 1 uF @ 50V or 63V C904 47 uF @ 50V C503 1 uF @ 50V or 63V C907 4.7 uF @ 160V C504 22 uF @ 250V C603 2.2 uF @ 50V A source for many problems with this monitor is loose solder connections. It is very common for loose connections to develop where plugs are soldered to the main and high voltage circuit boards. If you have any problems feel free to call us for help. (C) 1994 Zanen Electronics. All Rights Reserved ===============================================================================