From: gbbs2df2@ibmmail.com Newsgroups: rec.games.video.arcade.collecting Subject: congobong/TipTop.pin Date: Thu, 06 Jul 1995 19:03:24 GMT Congo Bongo based on Zaxxon pinouts by Dave Holcomb (holcomb@halcyon.com) Updated for Congo Bongo by Lee Taylor (lee@defender.demon.co.uk) Congo Bongo / Tip Top (same game alternative name) Sega, 1983 According to the service manual there apears to be two different board sets. One is constructed of 3 pcbs, the other 2. 3 Board set. ------------ Complete set part number 834-5165 Control pcb part number 834-5166 Video pcb part number 834-5167 Sound pcb part number 834-5168 2 Board set. ------------ Complete set part number 834-5180 Control pcb part number 834-5181 Video pcb part number 834-5167 Power Requiremnets. ------------------- Voltage Current DC 5V 4.2 Amps DC 12V 1.5 Amps 44-pin connector SOLDER SIDE | PARTS SIDE ------------------------------------|-------------------------------------- Gnd | A | 1 | Gnd --------------------------------|---|---|---------------------------------- Gnd | B | 2 | Gnd --------------------------------|---|---|---------------------------------- +5V | C | 3 | +5V --------------------------------|---|---|---------------------------------- +5V | D | 4 | +5V --------------------------------|---|---|---------------------------------- NC | E | 5 | NC --------------------------------|---|---|---------------------------------- +12V | F | 6 | (+12V) --------------------------------|---|---|---------------------------------- Spkr - | H | 7 | Spkr + --------------------------------|---|---|---------------------------------- Coin Meter 1 | J | 8 | Coin Meter 2 --------------------------------|---|---|---------------------------------- Coin Mech 1 | K | 9 | Coin Mech 2 --------------------------------|---|---|---------------------------------- Reset | L | 10| Service Switch --------------------------------|---|---|---------------------------------- P1 Start | M | 11| P2 Start --------------------------------|---|---|---------------------------------- P1 Left (North) | N | 12| P1 Right (South) --------------------------------|---|---|---------------------------------- P1 Up (East) | P | 13| P1 Down (West) --------------------------------|---|---|---------------------------------- P1 Fire | R | 14| NC --------------------------------|---|---|---------------------------------- P2 Left (North) | S | 15| P2 Right (South) --------------------------------|---|---|---------------------------------- P2 Up (East) | T | 16| P2 Down (West) --------------------------------|---|---|---------------------------------- P2 Fire | U | 17| NC --------------------------------|---|---|---------------------------------- Gnd | V | 18| Gnd --------------------------------|---|---|---------------------------------- Red | W | 19| Green --------------------------------|---|---|---------------------------------- Blue | X | 20| Comp Sync* (Negative) --------------------------------|---|---|---------------------------------- Gnd | Y | 21| Gnd --------------------------------|---|---|---------------------------------- Gnd | Z | 22| Gnd --------------------------------------------------------------------------- * The schematics show a switch for change the video sync from negative to positive this is not fitted on my board! Lee Taylor